基于双谱滤波的综合脉冲星时算法研究

毫秒脉冲星的自转频率非常稳定,提供了一种独立的基于遥远自然天体并能持续数百万乃至数十亿年的时间基准,具有稳定性强、运行时间长、服务范围广等特点.为了减弱毫秒脉冲星计时观测中各种高斯噪声对脉冲星时的影响,研究了一种基于双谱滤波的综合脉冲星时构建算法,处理分析了国际脉冲星计时阵(International Pul-sar Timing Array,IPTA)最新发布的4颗毫秒脉冲星(PSR J0437-4715、J0613-0200、J1713+0747和J1909-3744)的观测数据,分析了不同时间尺度综合脉冲星时的稳定性,并与构成国际原子时(International Atomic Time,TAI)的4家授时单位原子钟稳定性进行了比较.结果表明:双谱滤波算法能够较好地抑制观测噪声,提高综合脉冲星时的稳定性.相比于经典加权算法,综合脉冲星时1 yr、10 yr稳定度从7.77×10^-14、8.56×10^-16分别提高到1.50×10^-14、3.50×10^-16,单脉冲星时稳定性的提升也类似.同时发现,综合脉冲星时稳定性在5 yr及以上时间尺度上优于原子钟稳定性,可用于改善当前原子时的长期稳定性.     

不同盐度对文蛤(Meretrix meretrix)呼吸代谢及体内酶活性的影响

为研究不同盐度对文蛤呼吸代谢的影响,本实验设置5个盐度(‰)梯度(11、18、25、32、39),检测不同盐度对文蛤(Meretrixmeretrix)耗氧和排氨的影响,以及文蛤的外套膜、鳃、肝胰腺三种组织中乳酸脱氢酶和Na+/K+-ATP酶活性的变化。结果表明:随着盐度的不断升高,文蛤耗氧率先升后降再升,在盐度18时达到最大值;排氨率先升后降,在盐度32时达到最大值。随着盐度不断升高和胁迫时间延长,文蛤的肝胰腺中乳酸脱氢酶活力总体呈先升高后下降再升高的趋势(P0.05),酶活力在盐度39时为最高;随着盐度不断升高和胁迫时间延长,文蛤的外套膜中Na+/K+-ATP酶活力总体呈先下降再升高后下降的趋势(P0.05),在盐度32时为最高;文蛤的外套膜和鳃中乳酸脱氢酶活力以及鳃和肝胰腺中Na+/K+-ATP酶活力受盐度影响不显著(P0.05),酶活力变化也多呈现"W"形的变化趋势。研究结果为文蛤的人工养殖提供参考。     

A New Wavelet Method for Identification of Eddies and Assessment of Incidents on Islands of the Eastern Caribbean

Using two dimensional continuous wavelet transforms, a novel method for identification of mesoscale eddies is presented to facilitate extraction of characteristics for area, amplitude, type, and location from maps of sea level anomalies. In comparison with the previously established growing method for eddy identification, it is found that the wavelet method identifies more than twice the number of eddies and is particularly better at resolving small eddies down to the 0.25 degree resolution of the data. Such research into eddy identification and tracking is significant to the assessment of eddies with potential to impact on coastlines of small islands. The method is applied to the identification of eddies on tracks towards islands of the Eastern Caribbean over 23?years. Spatial and temporal variation in rate of occurrence and magnitude is established. For Barbados there is an average of 9 anticyclonic incidents a year with maximum amplitude of typically 0.22?m in the dry seasons and 0.16?m in the wet seasons. Seasonal variation is reversed for the other islands with twice the number of anticyclonic incidents having maximum amplitudes of about 0.20?m annually.     

复杂地形景区三维导览图的设计与实现

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。     

连续台风时期香港区域的水汽变化分析

利用香港卫星定位参考站网GNSS观测数据,提取强热带风暴"塔拉斯"与热带风暴"洛克"影响期间各测站天顶方向对流层延迟,反演香港区域大气可降水量;根据香港区域49个天文台气象站提供的实测降雨量数据,分析大气可降水量与实际降雨量的相关性,以及两次台风对香港区域水汽时空分布的不同影响。结果表明,大气可降水量在台风影响前期均上升,在大量降雨后回落,但在连续台风的间歇期间,仍高于台风来临前的水平;水汽累积是大量降雨的前提条件,当水汽累积量相近时,水汽累积时长与累积降雨量呈正相关;台风期间大气可降水量值超过65 mm的区域面积与台风等级相关,台风路径对局部水汽分布有一定的影响。     

基于PSR-WSVM模型的边坡位移预测

为建立高精度的边坡位移预测模型，采用相空间重构（PSR）将边坡位移时间序列数据转换为多维数据，同时构造小波核函数改进的支持向量机模型，建立PSR-WSVM模型并应用于边坡位移预测。将PSR-WSVM模型预测结果与传统支持向量机（SVM）模型、小波支持向量机（WSVM）模型和基于相空间重构的支持向量机（PSR-SVM）模型预测结果进行对比，通过平均绝对误差（MAE）、平均绝对误差百分比（MAPE）和均方根误差（RMSE）3个精度评价指标验证PSR-WSVM模型的可行性。工程实例结果表明，PSR-WSVM模型预测结果的3个精度评价指标都优于另外3种模型，边坡位移预测的精度明显提升。     

毛乌素沙区1961-2016年降水特征

基于毛乌素沙区10个气象站1961-2016年观测资料，应用Mann-Kendall方法和t检验法对各气象站年降水量进行了突变检验，借助小波分析讨论了各气象站年降水量的周期特征，根据降水量等值线划分结果对整个研究区分区分析了年、季、月和日尺度上的降水变化特征，并在两个时段上分析了季节性降水的差异。结果表明：毛乌素沙区年降水量空间特征差异明显，东部亚区呈上升趋势，中西部亚区呈下降趋势，但变化趋势不显著且无突变发生；降水年内分配不均，干湿季分明，降水集中在5-9月，夏秋季降水占全年降水比重大，季、月和日尺度降水量存在梯度递减变化；年降水量的年际变化过程存在多重时间尺度的自相似结构；近26年的冬春季降水增加显著，但降水波动幅度小于前30年。     

Peaks of People: Using Topographic Prominence as a Method for Determining the Ranked Significance of Population Centers

This article borrows a statistical method from physical geography—topographical prominence—to suggest a new technique for measuring the relative significance or rank of population centers. Unlike raw population measures, prominence gives consideration to both the spatial intensity of concentrated population areas as well as the spatial dependence or independence of neighboring settlement clusters in relation to one another. We explain how to apply the topographic prominence calculation method to gridded population data and examine its practical utility through case studies of several U.S. states. We then discuss some ways in which parametric choices about point-to-surface transformations can result in considerably different outcomes and offer further suggestions for conceptualizing and measuring population center significance.     

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.